busconverter.gif

SCSI converters

We stock all types of SCSI and iSCSI converters, extenders, repeaters and other SCSI accessories.

Paralan's wide product line of SCSI Converters permits different SCSI Bus types to communicate with ease and reliability, and with no loss of data throughput.

Product Highlights include:

·  Models for conversion between SE, HVD, LVD

·  Add HVD devices to LVD/MSE systems

·  Add LVD/MSE devices to HVD systems

·  Full SCSI cable lengths on all segments

·  Extend SCSI Bus cable length

·  Maintain data throughput

·  Transparent to software, hardware and operator

·  Will not consume a SCSI I.D

·  Plug and go installation

·  Complies with all ANSI X3T10 SCSI standards

 

Productstack.gif Paralan - Ultra 320 to HVD converter - # MH32

LVD/MSE TO SE CONVERTER

 

Ultra320 TO HVD SCSI CONVERTER - # MH32

 

  • Convert Between All Versions of LVD/MSE/SE/HVD
  • Extend LVD/MSE/SE/HVD Bus Length
  • Isolate HVD Segments of a SCSI bus
  • Targets and initiators may be located on both sides of the Expander
  • The models are backward compatible with older versions of SCSI
  • Does not consume a SCSI ID

·         Stand-alone and Board-level Versions available:

$453.00

Paralan - LVD to HVD converter - # MH16
LVD/MSE TO HVD SCSI CONVERTER

LVD/MSE TO HVD SCSI CONVERTER

  • Convert Between LVD or Single-ended and HVD
  • Extend SE or LVD Bus Length
  • Isolate HVD Segments of a SCSI bus
  • Targets and initiators may be located on both sides of the Expander
  • The models are backward compatible with older versions of SCSI
  • Does not consume a SCSI ID
  • Stand-alone and Board-level Versions available:

 


MH16
$443.00

Paralan - LVD to SE converter - # MS16
LVD/MSE TO SE CONVERTER

LVD/MSE to SE Converter

  • Convert Between LVD/MSE and Single-Ended
  • Extend Bus Length
  • Isolate Segments of a SCSI Bus
  • Targets and initiators may be located on both the A and B sides of the Expander
  • The Series 80 models are backward compatible with older versions of SCSI
  • Does not consume a SCSI ID

 


MS16
$325.00

Paralan - SE to HVD converter - # SD10
LVD/MSE TO SE CONVERTER

SCSI SE to HVD Converters

SE-HVD SCSI converters and extenders enable you to interconnect single-ended and differential interface.

  • Convert between Single-ended SCSI and HVD SCSI devices
  • Both 8-bit and 16-bit Models
  • Extend SCSI Bus Length

 

 


SD10
$394.00

Paralan - SCSI Extenders - # MM16
Paralan SCSI Extenders

Paralan SCSI Extenders

 

Paralan's high-quality family of SCSI Bus Extender and RegeneratoR™ products lengthen data transmission distance with complete transparency.

SCSI Multimode Expander MM16 Extends the SCSI Bus Length of an LVD/MSE System

 

  • Extend Bus Length
  • Up to 160 MByte/sec sustained throughput
  • Convert Between LVD and Single-ended
  • Isolate Segments of a SCSI bus
  • Targets and initiators may be located on both the A and B sides of the Expander
  • Backward compatible with older versions of SCSI
  • Does not consume a SCSI ID
  • The board-level version Model MM17 is sized to fit in a standard 3.5" drive bay

 

 

 

 


MM16
$374.00

iS500box.gif Paralan - iSCSI Bridge - HVD - # iS530

LVD/MSE TO SE CONVERTER

Paralan iSCSI Bridge - HVD Stand-Alone

 

One of the fastest and most cost-effective iSCSI bridge solutions available, the iS500 Bridge Family can be used to locate parallel SCSI storage at any distance via an Ethernet port using iSCSI protocol.

If you have an IP SAN (Internet Protocol Storage Area Network), Paralan's iS500 Family of iSCSI Bridges will easily connect your parallel SCSI devices to an IP SAN and merge “Direct Attached Storage” (DAS) systems and devices into networked iSCSI storage environments.

If you do not have a SAN, Paralan's iS500 Family of iSCSI Bridges will easily and inexpensively locate storage and backup SCSI devices anywhere for disaster recovery or remote backup - yards, meters, kilometers, or miles - the distance is unlimited!

$894.00

Paralan - iSCSI Bridge - LVD/MSE - # iS520
LVD/MSE TO SE CONVERTER

Paralan iSCSI Bridge - LVD/MSE Stand-Alone

 

One of the fastest and most cost-effective iSCSI bridge solutions available, the iS500 Bridge Family can be used to locate parallel SCSI storage at any distance via an Ethernet port using iSCSI protocol.

If you have an IP SAN (Internet Protocol Storage Area Network), Paralan's iS500 Family of iSCSI Bridges will easily connect your parallel SCSI devices to an IP SAN and merge “Direct Attached Storage” (DAS) systems and devices into networked iSCSI storage environments.

If you do not have a SAN, Paralan's iS500 Family of iSCSI Bridges will easily and inexpensively locate storage and backup SCSI devices anywhere for disaster recovery or remote backup - yards, meters, kilometers, or miles - the distance is unlimited!


IS520
$595.00